Skip to content
Exposed AggregateSpecialists Melbourne
  1. Home
  2. Areas
  3. Mentone

Mentone 3194 · City of Kingston

Exposed aggregate in Mentone

Call (03) 4052 5257 or get a free written quote.

Exposed aggregate in Mentone, 3194

Mentone is quietly doing what Hampton did a decade ago: the 1960s brick veneers around the schools are being rebuilt or extended by families moving down the bay line, and the driveways are coming up to match. It is honest, flat, straightforward pouring country, which is exactly what makes it good exposed aggregate country: easy access, sandy base, a council that moves quickly, and frontages where a decorative surface visibly lifts the whole streetscape.

Ground conditions

Flat sandy ground with good access on most blocks. Compaction under the slab is the requirement; drama is not. The occasional older street with clay fill is picked up at the site measure.

Stone and paste for Mentone homes

The suburb splits between original brick, which takes the warm Castlemaine buff range over natural grey, and new family builds in render, which follow their trim into mid grey and charcoal blends. Mentone’s school-run driveways work hard, so the practical calls matter: 10mm stone at a proper exposure, and a sealer that keeps grip through wet winters. Samples are viewed wet and dry at the house before the mix is confirmed, per the colours and stone guide.

Permits and the crossover

Kingston requires a vehicle crossing permit for new or altered crossovers, built to the council standard drawing and inspected before pouring. It is lodged with the quote and rarely holds anything up.

What exposed aggregate costs in Mentone

Driveways run $130 to $185 per m², patios and alfresco $140 to $195, paths $130 to $180, resealing $18 to $30 with a minimum charge, and removal and replacement $165 to $220 including the old drive out. Flat access keeps Mentone jobs at the friendly end of each range; the cost guide has the worked examples, and the written quote after a site measure is fixed.

City of Kingston crossovers in Mentone

Covers Mentone in our service area. The ground is mostly flat with a sandy base and access is straightforward, and Kingston turns permits around quickly, so jobs here tend to move from quote to pour with little waiting.

Council crossover information

Nearby suburbs we also cover

Hampton, Bentleigh. See where we work.

What we pour in Mentone

Prices are guides and move with site conditions; the cost guide covers what moves them, and the colours and stone guide covers the choice everyone spends longest on. The written quote after a site measure is fixed.

Questions

Exposed aggregate in Mentone, answered

Do I need a permit for an exposed aggregate driveway in Mentone?

Kingston requires a vehicle crossing permit for new or altered crossovers, built to the council standard drawing and inspected before pouring.

What does exposed aggregate cost in Mentone?

Driveways run $130 to $185 per m² and patios $140 to $195, supplied and laid; the cost guide publishes every service including resealing and full replacement. Prices may vary with site conditions and variations; the written quote after a site measure is fixed.

Can new work match my existing exposed aggregate?

A close match is achievable when the stone source and paste colour are known, and a sample viewed against the existing surface is the reliable check. Weathered concrete has years of UV in it, so new work starts cleaner and settles towards the old over time.

Next step

Ready to price your exposed aggregate?

One fixed written quote, after a proper site measure and a look at the samples.

Call (03) 4052 5257 Get a Free Quote